ICDT-27HMI-V2
27HMI v2 Configurable CAN Display
Round 52 mm J1939 gauge display that you configure for your own CAN messages.
Price on request
Home/Products
Products
CAN-bus displays, controllers, systems and accessories. Add items to your order, or request a quote for configured systems.
ICDT-RPM-TSC1
Engine Speed Controller (J1939 TSC1)
Set engine RPM from the panel with the J1939 TSC1 message, without opening the engine ECU.
Price on request
ICDT-RPM-OBD
Engine RPM Controller with OBD Cable
Plug-and-play engine speed control through the vehicle's 16-pin diagnostic port.
Price on request
ICDT-ALM-1001
ALM-1001 Axle Load Monitor
Live axle load at the driver's dash, with overload warning lights.
Price on request
ICDT-CL28
2.8" Engine Cluster Display
Full-color engine cluster with 10 configurable tell-tales and up to 5 custom screens.
Price on request
ICDT-HMI5
5" CAN HMI
800 × 480 dual-CAN operator display with up to 10 custom screens.
Price on request
ICDT-HMI7
7" CAN HMI with Camera Inputs
7-inch dual-CAN cab display with two camera inputs and four analog inputs.
Price on request
ICDT-CAN4
4" CAN FD Smart Gauge
Square 480 × 480 IPS gauge with CAN FD and Wi-Fi, for engine monitoring, diagnostics and custom gauges.
Coming soon
Notify me
AIE1616A
16-16 Programmable ECU
16 inputs, 16 outputs, 8-35 V. An electronic control unit you can program for your own application.
Price on request
ICDT-1212ECU
12-12 J1939 I/O ECU
A 12-in / 12-out ECU, pre-configured as a CAN 2.0B J1939 slave.
Price on request
AICDT/EGR/101
EGR Valve Controller (Pulse to J1939 DM1)
Converts a traditional EGR lamp pulse signal into a J1939 DM1 fault message.
Price on request
ICDT-BCM-RX16
BCM Relay Expansion Module
16 relays and 20 fuses in a sealed box, ready to pair with an ECU-based body controller.
Price on request
ICDT-MCC100
MCC100 CAN IoT Gateway (4G LTE + GNSS)
Dual-CAN 4G telematics gateway with GNSS and on-board logic. Use our cloud, or bring your own.
Price on request
TTC-2030-SERIES
TTControl TTC 2030 Series Controllers
TTControl mobile-machine controllers, supplied and programmed in CODESYS by ICDT.
Configured to order · Quote
IFM-CR-SERIES
ifm ecomatDisplay CR Series HMIs
ifm CR-series mobile displays, with custom screens and remote programming set up by ICDT.
Configured to order · Quote
ICDT-MS32
MS32 Manure Spreader Control System
Plug-and-play spread-rate control for truck and trailer manure spreaders, now with audio warning.
Configured to order · Quote
ICDT-SPR
Smart Sprayer Control System
Complete control of sprayer hydraulics, nozzles, cab HVAC and navigation, with variable-rate spraying.
Configured to order · Quote
ICDT-FIRE-PKG
Fire Truck Hydraulic & Engine Control Package
16-16 ECU and 5" display in a custom enclosure, for outriggers, boom and remote engine speed.
Configured to order · Quote
ICDT-BCM-V1
Body Control Module Package (CODESYS)
A 16-in / 16-out IP69 ECU with BCM programming for commercial vehicles. Add the relay module and a CAN switch panel.
Configured to order · Quote
ICDT-CSP
Custom CAN Switch Panel
Toggle switches and push buttons on a 4-wire CAN interface, with your graphics and logo.
Configured to order · Quote
ICDT-DW-PKG
Pump Engine Speed & Flow Logging Package
Engine governor control, live flow readout and PC data logging for dewatering pump sets.
Configured to order · Quote
ICDT-CK48
ECU Mating Connector Kit (Molex 500762-0481)
Complete mating connector kit for the 16-16 and 12-12 ECUs.
Price on request